15º Simposio Internacional de Tesis y Disertaciones Electrónicas

Presentación del tema: "15º Simposio Internacional de Tesis y Disertaciones Electrónicas"— Transcripción de la presentación:

1 15º Simposio Internacional de Tesis y Disertaciones Electrónicas
Lima, de septiembre 2012 “ Fondo Histórico de Tesis y Tesis Digitales: su uso en la Formación de Usuarios que realizan la Tesis a través del EVA” Facultad de Ciencias Económicas y de Administración, Universidad de la República-Uruguay. 1

2 ¿Quién es EVA? Es el Entorno Virtual de Aprendizaje,
plataforma educativa de la Universidad de la República (UDELAR). Tiene como finalidad promover distintas modalidades de cursado de enseñanza de grado. A través de ella se puede acceder a cursos virtuales o semi-presenciales de cada facultad. El EVA permite la integración de TICs en los procesos de enseñanza universitaria, con la utilización de un software que da soporte al aprendizaje colectivo. 2

3 ¿Cómo funciona? Integra de manera amplia los distintos servicios universitarios y las sedes del interior del país, reconociendo y potenciando su heterogeneidad en la UDELAR. Brinda apoyo a otras instituciones, organizaciones sociales o colectivos que requieran estos servicios, permite varias funcionalidades que sirven de apoyo a las estrategias de enseñanza, investigación y extensión, entre las que se destacan: Creación y gestión de cursos Creación de espacios para grupos de trabajo, Comunicación, creación colectiva Gestión de usuarios Aprendizaje colaborativo y herramientas de evaluación 3

4 Gestión de EVAs Se desarrolla en base a Moodle:
una herramienta de Software Libre licenciado bajo GPL (Licencia Pública General). Actualmente en la UDELAR funcionan, de modo integrado y coordinado, doce Entornos Virtuales de Aprendizaje: un EVA central y once EVAs gestionados por sus propios servicios 4

5 o o o o o o

6 Detectando Problemas Falta de información por parte de los usuarios al momento de realizar su tesis Ausencia de normas estandarizadas destinadas a la preparación y presentación de las tesis Poca presencia de usuarios en los cursos presenciales que la biblioteca brinda para orientación de tesis 6

7 Qué es el EVBM El Espacio Virtual de Biblioteca para Tesis es una herramienta, creada en la plataforma Moodle de la UdelaR, enfocada a orientar y asesorar a los estudiantes que están preparando su tesis para una correcta preparación y presentación de sus trabajos de grado 7

8 Servicios que ofrece el EVBM
Asesoramiento especializado Actualización de sus contenidos de acuerdo a las necesidades de los usuarios Pautas para la normalización bibliográfica Integración de gran variedad de servicios como enlaces a cátedras, acceso a bases de datos y toda la información inherente a la preparación de las Tesis 8

9 Apoyo para Tesis Custom animation effects: faded zoom text, collapse, and stretch (Intermediate) Tip: This effect can be applied to a series of names, award recipients, team members, etc. To reproduce the text effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Franklin Gothic Heavy from the Font list, enter 56 in the Font Size box, and then click Bold. On the Home tab, in the Paragraph group, click Center to center the text in the text box. With the text box still selected, under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click Text Fill in the left pane, select Gradient fill in the Text Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 25%. Click the button next to Color, and click More Colors. In the Colors dialog box, on the Custom tab enter values for Red: 219, Green: 76, and Blue: 19. Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, and click More Colors, and then in the Colors dialog box, on the Custom tab enter values for Red: 245, Green: 174, and Blue: 135. On the slice, select the text box. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Right-click the second text box, and then click Edit Text. Enter new text. On the slide, press and hold CTRL, and then select both text boxes. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Middle. Click Align Center. To reproduce the animation effects for the first text box on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. On the slide, select the text box. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Faded Zoom. Select the animation effect (faded zoom effect for the first text box). Under Modify: Faded Zoom, do the following: In the Start list, select With Previous. In the Speed list, select Medium. On the slide, select the first text box. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly-In. Select the second animation effect (fly-in effect for the first text box). Under Modify: Fly In, do the following: In the Direction list, select From Top. Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Moderate, click Collapse. Select the third animation effect (collapse effect for the first text box). Click the arrow next to the selected effect, and then click Effect Options. In the Collapse dialog box, do the following: On the Effect tab, in the Direction list, select Across. On the Timing tab, do the following: In the Start list, select After Previous. In the Delay box, enter 0.5. In the Speed list, select 1 seconds (Fast). To reproduce the animation effects for the second text box on this slide, do the following: On the slide, select the second text box. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Exit Effect dialog box, under Moderate, click Stretch. Select the fourth animation effect (stretch effect for the second text box). Click the arrow next to the stretch effect, and then select Effect Options. In the Stretch dialog box, do the following: In the Delay box, enter 1. Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Basic, click Fly Out. Select the fifth animation effect (fly-out effect for the second text box). Click the arrow next to the fly-out effect, and then select Effect Options. In the Fly Out dialog box, do the following: On the Effect tab, in the Direction list, select To Bottom. In the Speed list, select 2 seconds (Medium). Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Subtle, click Faded Zoom. Select the sixth animation effect (faded zoom effect for the second text box). Under Modify: Faded Zoom, do the following: To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial. Click the button next to Direction, and then click From Center (third option from the left). Click the button next to Color, and then click White, Background 1 (first row, first option from the left). Click the button next to Color, and then click Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left). 9

10 Optimizar los recursos digitales
Orientar al estudiante en la elaboración del trabajo y propender a la normalización del mismo para contribuir al éxito de la comunicación y transferencia de información Capacitar al usuario para encontrar, evaluar y usar información de cualquier fuente, eficazmente, para resolver problemas o tomar decisiones Custom animation effects: spotlight text (Intermediate) To reproduce the text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. On the Home tab, in the Slides group, click Layout, and then click Blank. Enter text in the text box and select the text. On the Home tab, in the Font group, do the following: In the Font list, select Arial Black. On the Home tab, in the Paragraph group, click Center to center the text in the text box. Click Bold. In the Font Size box, enter 50. Select the text box. Under Drawing Tools, on the Format tab, in bottom right corner of the WordArt Styles, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click Text Fill in the left pane, select Gradient fill in the Text Fill pane, and then do the following: Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0%. Select Stop 2 from the list, and then do the following: Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). Also in the Format Text Effects dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format pane: Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Stop position box, enter 100%. Under Depth, click the button next to Color, and then select Automatic. Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left). Next to Top, in the Width box, enter 10 pt, and in the Height box, enter 2.5 pt. Under Contour, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 68, Green: 113, Blue: 166. In the Size box, enter 0.5 pt. Under Surface, click the button next to Material, and then under Standard click Metal (fourth option from the left). Click the button next to Lighting, and then under Neutral click Contrasting (second row, second option from the left). In the Angle box, enter 75°. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the text box above the middle of the slide. Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, touching (first row, second option from the left). Click Align Center. Click Align to Slide. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial. Click the button next to Direction, and then click From Center (third option from the left). Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 5% (second row, first option from the left). To reproduce the shape effects on this slide, do the following: Select the oval. Under Drawing Tools, on the Format tab, in the Size group, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). On the slide, drag to draw an oval. In the Shape Height box, enter 1.1”. With the oval still selected, on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Shape Width box, enter 2.31”. Under Gradient stops, click Add or Remove until three stops appear in the drop-down list. In the Transparency box, enter 21%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Stop position box, enter 51%. Select Stop 3 from the list, and then do the following: In the Transparency box, enter 73%. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, do the following: In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, first option from the left). On the slide, drag the oval until it is centered on the first letter in the text box. Click Shape Effects, point to Soft Edges, and then click 25 Point. Click the arrow next to Shape Outline, and then click No Outline. To reproduce the animation effects on this slide, do the following: On the slide, select the oval. In the Custom Animation task pane, do the following: On the Animations tab, in the Animations group, click Custom Animation. Select the animation effect (fade entrance effect for the oval). Under Modify: Fade, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade. In the Start box, select With Previous. In the Speed box, select Fast. Select the second animation effect (fade exit effect for the oval). Click the arrow to the right of the animation effect, and then click Timing. In the Fade dialog box, on the Timing tab, do the following: Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Subtle, click Fade. In the Delay box, enter 4. In the Start list, select With Previous. In the Speed list, select 1 seconds (Fast). Select the third animation effect (fade entrance effect for the oval). Click the arrow to the right of the animation effect, and then click Timing. In the Fade dialog box, on the Timing tab, do the following: In the Delay box, enter 5. Select the fourth animation effect (fade exit effect for the oval). Click the arrow to the right of the animation effect, and then click Timing. In the Fade dialog box, on the Timing tab, do the following: In the Delay box, enter 7. Select the fifth animation effect (motion path for the oval). Click the arrow to the right of the animation effect, and then click Effect Options. In the Fade dialog box, do the following: Click Add Effect, point to Motion Paths, and then click Right. On the Timing tab, do the following: On the Effect tab, under Path, select Auto-reverse. In the Repeat list, select 2. In the Speed list, select 2 seconds (Medium). In the Delay box, enter 0. On the slide, select the motion path. Point to the endpoint (red arrow) of the motion path until the cursor becomes a two-headed arrow, press and hold SHIFT, and then drag the endpoint to the center of the last letter in the text box. Optimizar los recursos digitales 10

11 Características Tipos de Usuarios Acceso Dinámica del EVBM
Estudiantes que estén preparando su Tesis Tutores y Coordinadores de Tesis Docentes de la Facultad de Ciencias Económicas y de Administración Acceso Plataforma Moodle de la Facultad de C.E.A Custom animation effects: fly-in and shrink lines, stretch rectangles (Intermediate) To reproduce the first vertical line on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line. On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 4.5”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient fill in the Line Color pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Right (first row, fourth option from the left). In the Angle box, enter 0°. Under Gradient stops, click Add or Remove until three stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0%. Click the button next to Color, select More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 148, Green: 172, and Blue: 208. In the Transparency box, enter 100%. Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%. In the Transparency box, enter 0%. Select Stop 3 from the list, and then do the following: In the Stop position box, enter 99%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 6 pt. To reproduce the first rectangle on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 2”. In the Shape Width box, enter 2”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Click the button next to Direction, and then click Linear Up (second row, second option from the left). In the Angle box, enter 270°. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 44, Green: 93, and Blue: 152. In the Stop position box, enter 80%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 60, Green: 123, Blue: 199. In the Stop position box, enter 100%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 58, Green: 124, Blue: 203. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select No line. Also in the Format Shape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, do the following: Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left). Next to Top, in the Width box, enter 5 pt, and in the Height box, enter 2 pt. Under Surface, in the Angle box, enter 20°. On the slide, right-click the rectangle and then click Edit Text. Enter text in the text box and select the text. On the Home tab, in the Font group, do the following: In the Font list, select Calibri. In the Font Size list, select 32. Click the button next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the slide, press and hold CTRL, and then select the line and the rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Selected Objects. Click Align Left. With the line and rectangle still selected, drag them to the left side of the slide. To reproduce the animation effects for the first vertical line and rectangle on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. On the slide, select the line. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the first animation effect (fly-in effect for the line), and then under Modify: Fly In, do the following: In the Start list, select With Previous. In the Direction list, select From Top. In the Speed list, select Fast. Click Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Grow/Shrink. Select the second animation effect (grow/shrink effect for the line). Click the arrow to the right of the effect, and then click Effect Options. In the Grow/Shrink dialog box, do the following: On the Effect tab, do the following: In the Size list, select Tiny. Also in the Size list, select Vertical. On the Timing tab, do the following: In the Delay box, enter 0.5. In the Speed list, select 1 seconds (Fast). On the slide, select the rectangle. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Moderate, click Stretch. Select the third animation effect (stretch effect for the rectangle), and then under Modify: Stretch, do the following: In the Start list, select After Previous. In the Direction list, select From Left. To reproduce the other shapes with animation effects on this slide, do the following: On the slide, press and hold CTRL, and then select the rectangle and the line. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. On the slide, drag the second line and rectangle to the center of the slide. With the second line and rectangle still selected, on the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. On the slide, drag the third line and rectangle to the right side of the slide. On the slide, press CTRL+A to select all the objects. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Middle. Click the text in each of the duplicate rectangles, and then edit the text. On the slide, select the second (middle) line. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient fill in the Line Color pane, and then do the following: Click the button next to Color, select More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 154, Green: 181, Blue: 228. Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 25% (fourth row, first option from the left). On the slide, select the second (middle) rectangle. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 149, Blue: 53. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 115, Green: 195, Blue: 72. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 156, Green: 199, Blue: 70. On the slide, select the third (right) line. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient fill in the Line Color pane, and then do the following: Click the button next to Color, and then under Theme Colors click Aqua, Accent 5, Lighter 40% (fourth row, ninth option from the left). On the slide, select the third (right) rectangle. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Click the button next to Color, select More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 39, Green: 135, Blue: 160. Click the button next to Color, select More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 54, Green: 177, Blue: 210. Click the button next to Color, select More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 52, Green: 179, Blue: 214. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial. Click the button next to Direction, and then click From Center (third option from the left). In the Stop position box, enter 33%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Stop position box, enter 67%. Click the button next to Color, select More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 228, Green: 233, Blue: 236. Click the button next to Color, select More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 178, Green: 186, Blue: 210. Recursos en continua actualización y revisión (manuales, guías y enlaces) Dinámica del EVBM El usuario podrá ingresar desde cualquier sitio y en el momento que desee 11

12 Principales Módulos Módulo Introductorio
Custom animation effects: line sweeps in picture and text (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left). On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line. Select the line. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 7.5”. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Weight box, enter 2 pt. Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, and then under Glow Variations click Accent color 1, 5 pt glow (first row, first option from the left). Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, point to More Glow Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, select the line. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Drag the duplicate line slightly off the right edge of the slide. With the duplicate line still selected, on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 7.5” and the Width box is set to 5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Click Align Right. To reproduce the text effects on this slide, do the following: On the Insert tab, in the Illustrations group, click Text Box. On the slide, drag to draw a text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Arial. In the Font Size list, select 28. Click Bold. Click the button next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Paragraph group, click Align Text Right to align the text right in the text box. Drag the text box onto the left half of the slide. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 40%. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, and then click Black, Text 1, Lighter 50% (second row, second option from the left). To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. Select the line off the right edge of the slide. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the animation effect (fly-in effect for the second line). Under Modify: Fly In, do the following: In the Start list, select After Previous. In the Direction list, select From Left. In the Speed list, select Fast. On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first line you created (in the middle of the slide). In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the second animation effect (fly-in effect for the first line). Under Modify: Fly In, do the following: In the Direction list, select From Right. On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Wipe. Select the third animation effect (wipe effect for the picture). Under Modify: Wipe, do the following: In the Start list, select With Previous. On the slide, select the text box. In the Custom Animation task pane, do the following: Select the fourth animation effect (fly-in effect for the text box). Under Modify: Fly In, do the following: 12

13 Información sobre la Biblioteca
Cómo preparar y Presentar las Tesis Custom animation effects: line sweeps in picture and text (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left). On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line. Select the line. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 7.5”. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Weight box, enter 2 pt. Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, and then under Glow Variations click Accent color 1, 5 pt glow (first row, first option from the left). Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, point to More Glow Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, select the line. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Drag the duplicate line slightly off the right edge of the slide. With the duplicate line still selected, on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 7.5” and the Width box is set to 5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Click Align Right. To reproduce the text effects on this slide, do the following: On the Insert tab, in the Illustrations group, click Text Box. On the slide, drag to draw a text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Arial. In the Font Size list, select 28. Click Bold. Click the button next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Paragraph group, click Align Text Right to align the text right in the text box. Drag the text box onto the left half of the slide. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 40%. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, and then click Black, Text 1, Lighter 50% (second row, second option from the left). To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. Select the line off the right edge of the slide. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the animation effect (fly-in effect for the second line). Under Modify: Fly In, do the following: In the Start list, select After Previous. In the Direction list, select From Left. In the Speed list, select Fast. On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first line you created (in the middle of the slide). In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the second animation effect (fly-in effect for the first line). Under Modify: Fly In, do the following: In the Direction list, select From Right. On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Wipe. Select the third animation effect (wipe effect for the picture). Under Modify: Wipe, do the following: In the Start list, select With Previous. On the slide, select the text box. In the Custom Animation task pane, do the following: Select the fourth animation effect (fly-in effect for the text box). Under Modify: Fly In, do the following: 13

14 Otras Tesis como ejemplos Últimos trabajos disponibles
Custom animation effects: line sweeps in picture and text (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left). On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line. Select the line. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 7.5”. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Weight box, enter 2 pt. Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, and then under Glow Variations click Accent color 1, 5 pt glow (first row, first option from the left). Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, point to More Glow Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, select the line. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Drag the duplicate line slightly off the right edge of the slide. With the duplicate line still selected, on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 7.5” and the Width box is set to 5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Click Align Right. To reproduce the text effects on this slide, do the following: On the Insert tab, in the Illustrations group, click Text Box. On the slide, drag to draw a text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Arial. In the Font Size list, select 28. Click Bold. Click the button next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Paragraph group, click Align Text Right to align the text right in the text box. Drag the text box onto the left half of the slide. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 40%. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, and then click Black, Text 1, Lighter 50% (second row, second option from the left). To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. Select the line off the right edge of the slide. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the animation effect (fly-in effect for the second line). Under Modify: Fly In, do the following: In the Start list, select After Previous. In the Direction list, select From Left. In the Speed list, select Fast. On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first line you created (in the middle of the slide). In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the second animation effect (fly-in effect for the first line). Under Modify: Fly In, do the following: In the Direction list, select From Right. On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Wipe. Select the third animation effect (wipe effect for the picture). Under Modify: Wipe, do the following: In the Start list, select With Previous. On the slide, select the text box. In the Custom Animation task pane, do the following: Select the fourth animation effect (fly-in effect for the text box). Under Modify: Fly In, do the following: 14

15 Tesis de FCEA BIUR EBSCO TIMBÓ SIDALC BVRIE
Bases de Datos disponibles: Tesis de FCEA BIUR EBSCO TIMBÓ SIDALC BVRIE Custom animation effects: line sweeps in picture and text (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left). On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line. Select the line. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 7.5”. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Weight box, enter 2 pt. Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, and then under Glow Variations click Accent color 1, 5 pt glow (first row, first option from the left). Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, point to More Glow Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, select the line. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Drag the duplicate line slightly off the right edge of the slide. With the duplicate line still selected, on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 7.5” and the Width box is set to 5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Click Align Right. To reproduce the text effects on this slide, do the following: On the Insert tab, in the Illustrations group, click Text Box. On the slide, drag to draw a text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Arial. In the Font Size list, select 28. Click Bold. Click the button next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Paragraph group, click Align Text Right to align the text right in the text box. Drag the text box onto the left half of the slide. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 40%. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, and then click Black, Text 1, Lighter 50% (second row, second option from the left). To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. Select the line off the right edge of the slide. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the animation effect (fly-in effect for the second line). Under Modify: Fly In, do the following: In the Start list, select After Previous. In the Direction list, select From Left. In the Speed list, select Fast. On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first line you created (in the middle of the slide). In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the second animation effect (fly-in effect for the first line). Under Modify: Fly In, do the following: In the Direction list, select From Right. On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Wipe. Select the third animation effect (wipe effect for the picture). Under Modify: Wipe, do the following: In the Start list, select With Previous. On the slide, select the text box. In the Custom Animation task pane, do the following: Select the fourth animation effect (fly-in effect for the text box). Under Modify: Fly In, do the following: 15

16 Servicios Generados Nuevos Manuales de Búsquedas adaptados a nuestras bases de datos y usuarios Videos Tutoriales para la búsqueda de Tesis Nuevas Pautas para Tesis aprobadas por el Consejo de FCEA Acceso virtual y descarga de las últimas Tesis aprobadas 16

17 Tutoriales Búsqueda básica en BIUR 17

18 18

19 Objetivos Maximizar la visibilidad, el uso y el impacto de la producción científica y académica Dar acceso abierto a la producción científica de la Institución, sin importar las fronteras físicas Gestionar y preservar la producción académica de la Institución Conservar la memoria organizacional para conservar el Know- how (objetivos 19

20 Fondo histórico de Tesis
Comprende los trabajos generados desde 1937 a 1970 Se están digitalizando las tesis desde 1937 a 2004, año en que comienza presentación en CD Las bibliotecas del Área Social, han realizado un proyecto conjunto para que las autoridades del área contraten el servicio de una empresa privada para la digitalización 20

21 En el ámbito docente, integrar el RI, al sistema de e-learning, aporta un entorno pedagógico rico en información. Gestionar el ingreso de los contenidos en un repositorio digital, permite a las instituciones incrementar su valor. Los RI, incluso pueden estimular un cambio cultural en la enseñanza y el aprendizaje, donde el uso de los medios y herramientas con el avance tecnológico acelera el enfoque pedagógico del uso de la información. 21

22 El nuevo paradigma introduce entre otras cosas, la necesidad de dotar al estudiante de competencias transversales y la conveniencia de evaluar todo el trabajo que realiza Los Repositorios Institucionales resultan una manera eficiente de socializar el conocimiento, por lo que se hace necesaria su implementación para lograr mejores prácticas. 22

23 A tener en cuenta Fijar los mecanismos de control de calidad
Adoptar un estándar de metadatos Adquirir un compromiso de gestión sostenible Proceso de diseño y gestión Escoger el software, incluyendo soluciones Open Source, compatibles con protocolos internacionales 23

24 24

25 25

26 Fortalezas: Debilidades:
Apoyo de las autoridades académicas en todo lo que signifique la mejora de la calidad del aprendizaje Personal bibliotecario experiente e involucrado en los avances académicos de la Universidad Interés y valoración por parte de los docentes, que participan en EVA, en esta actividad desarrollada por la Biblioteca Uso de nuevos recursos de información digitales y virtuales aprovechando las nuevas tecnologías (plataforma Moodle) Integración de convenios con otras unidades de información: TIMBÓ, BCU, SIDALC, etc. Disponibilidades de tutoriales, manuales y guías virtuales Debilidades: Necesidad de interrelación con otras áreas de la UDELAR para coordinar actividades en conjunto: marketing, servicios académicos, tecnología educativa, etc. Bajo porcentaje de comunicación con los docentes Falta de un plan de marketing hacia los docentes y egresados Falta de un plan de capacitación destinado a los docentes Falta de un programa institucionalizado de formación de usuarios “Las Fortalezas hacen que puedan aprovecharse las Oportunidades, en tanto que las Debilidades se convierten rápidamente en Amenazas que pueden dejar a cualquier proyecto fuera de competencia.”

27 Oportunidades: Amenazas:
Capacitación permanente del personal bibliotecario en el uso de nuevos recursos de información Posibilidad de desarrollar nuevos productos, como la digitalización de las tesis antiguas, buscando apoyar el e-learning y los servicios a distancia Adquisición por parte de la Facultad de CEA de colecciones digitales de e-books, e-commerce y otros recursos digitales disponibles en el ámbito académico Existen núcleos de docentes muy colaboradores Favorable aceptación y opinión de los destinatarios (estudiantes) Nuevo papel de la Biblioteca en el EVA que exigirá una mayor participación en proyectos de innovación docente y de apoyo a la investigación. Amenazas: Falta de interés (o desconocimiento) por parte del cuerpo docente por implicar a sus alumnos en el uso de la “Espacio Apoyo para Monografías” Los planes de estudio no incluyen los elementos de competencias informacionales Predominio de usuarios.net o “googlelizados” que tienden a buscar y encontrar la información fuera de los recursos ofrecidos por biblioteca Desconocimiento de los programas de ALFIN (alfabetización informacional) Cambio tecnológico continuo que plantea dificultades de adaptación y anticipación Falta de una política científica de la Institución

28

29 María Belén Echevarría Estol
Gracias! María Belén Echevarría Estol 29