La descarga está en progreso. Por favor, espere

La descarga está en progreso. Por favor, espere

FORO:PRODUCCIÓN DE RADIOISÓTOPOS CON ACELERADORES DE PARTÍCULAS Y SUS APLICACIONES EN MEDICINA NUCLEAR, PROCESOS BIOLÓGICOS, FÍSICA Y QUÍMICA DE MATERIALES.

Presentaciones similares


Presentación del tema: "FORO:PRODUCCIÓN DE RADIOISÓTOPOS CON ACELERADORES DE PARTÍCULAS Y SUS APLICACIONES EN MEDICINA NUCLEAR, PROCESOS BIOLÓGICOS, FÍSICA Y QUÍMICA DE MATERIALES."— Transcripción de la presentación:

1 FORO:PRODUCCIÓN DE RADIOISÓTOPOS CON ACELERADORES DE PARTÍCULAS Y SUS APLICACIONES EN MEDICINA NUCLEAR, PROCESOS BIOLÓGICOS, FÍSICA Y QUÍMICA DE MATERIALES

2 ¿Qué es la física de aceleradores?  Rama de la física aplicada que trata con el diseño, construcción y operación de aceleradores de partículas.  El objetivo es la producción de haces de partículas para diversas aplicaciones:  Física nuclear y de altas energías.  Ciencia de materiales.  Producción de isotopos.  Tratamiento de cancer, etc.

3 ¿Dónde se puede aprender física de aceleradores?  Cern Accelerator School (CAS):  Organizada por el CERN con base en Europa.  United States Particle Accelerator School (USPAS):  Patriocinada por el Departamento de Energía de Estados Unidos, con sede en USA.  International Accelerator School for Linear Colliders  Organizada por LCC, sede internacional.

4  Patrocinada por CONACyT, Tuvo lugar de sept. a oct. 2011 en la ciudad de Guanajuato, México.  50 estudiantes de licenciatura y posgrado (físicos e ingenieros) de todo el país.  Los cursos fueron impartidos por profesores de Europa y EU. 1 st Mexican Particle Accelerator School (MePAS)

5

6 Humberto Maury Cuna (Cinvestav-Mérida, PhD in September 2013): “Study of the heat load due to the electron cloud in the cold arc sections of the LHC” Frank Zimmerman (CERN) y Guillermo Contreras (CINVESTAV-MERIDA). Posdoctoral Fellowship at UG.

7 Bruce Yee Rendón (CINVESTAV, PhD December 2014) “Studies of machine protections for fast crab cavities failures in the High Luminosity Large Hadron Collider (CINVESTAV and CERN). Posdoctoral fellowship at KEK

8 Alejandro Castilla Loeza (UG PhD student) “Design and construction of crab cavities for electrón-ion colliders”. Jean Delayen (JLAB-ODU), M. Napsuciale (UG). PhD on March 2015. Posdoctoral felllowship at CERN.

9 Christian Valerio Lizárraga (UNISON-CERN, PhD student since 2012). Design and building of the LINAC for the LHeC. Karim Hernández Chain (PhD student, UG-CERN). Processsing and Operation of superconductive RF cavities for the SPL and CERN. Salvador Isaac Sosa Güitrón (ODU, PhD student, since 2012). New superconductor materials for high-gradient SRC.

10 Christian López Sánchez (UG, Ms in Sept. 2013), “Diseño electróstatico y procedimientos para alto vacío y alto voltaje en un cañon de electrones prototipo”. Carlos Hernández (JLAB), M. Napsuciale (UG). Ana Celene Cuevas Zúñiga (UG, M.sc. in Oct 2013), “Proceso de ultra alto vacío y simulación de la dinámica del haz” Carlos Hernández (JLAB), M. Napsuciale (UG).

11 Luis Eduardo Medina Medrano (PhD student since 2014 Optimization of the interaction region for TLEP). Frank Zimmerman (CERN). - (bachelor’s degree, August 2012) “Design of the acumulation ring for a synchrotron light source” M. Napsuciale (UG). Abrahan Joseph Pinedo López (UG, M.Sc.), Modeling of ion trapping & fast ion instability in the LHeC linac, Frank Zimmerman (CERN). Gerardo Guillermo Cantón (PhD student at CINVESTAV – Merida and CERN) Sychrotron-radiation photon distribution for the LHC and future colliders.

12 Daniel Chávez Valenzuela (PhD student) M.Sc. thesis: Experimental research and development of a Magnesium-diboride Cable (A&M Texas University). David Pável Juárez López (M.Sc. student from UG currently working in the Accelerator Physics Center of FERMILAB). Marvin Mellado Muñoz Working at Advanced Light source of Berkeley. Juan Reyes Herrera Working at ALBA, Spain. Alain Flores Tlalpa. Currently at IF-UNAM working on Optics of the accumulation ring for the light source ALBA.

13 Conclusiones  A enero de 2015, se tiene el registro de 16 personas trabajando en física de aceleradores ( Estudiantes de maestría, doctorado e investigadores).  Experiencia en:  Magnetos superconductores  Cavidades de radiofrecuencia  Sistemas de protección y seguridad  Fuentes de partículas  Aceleradores lineales  Aceleradore circulares.  Fuentes de luz sincrotrón  Dinámica de haces de partículas

14 Conclusiones:  Fuerte comunidad de física de aceleradores en crecimiento.  Entrenamiento y colaboración con: CERN, FERMILAB, DESY, ALBA, A&M Texas University, BNL, JLAB, ODU, KEK.  Experiencia para emprender, asesorar y/o apoyar proyectos de aceleradores en México (CEFMN).

15


Descargar ppt "FORO:PRODUCCIÓN DE RADIOISÓTOPOS CON ACELERADORES DE PARTÍCULAS Y SUS APLICACIONES EN MEDICINA NUCLEAR, PROCESOS BIOLÓGICOS, FÍSICA Y QUÍMICA DE MATERIALES."

Presentaciones similares


Anuncios Google